OK, hier versuche ich das ganze Seiten Kuddel muddel mal zu entzerren, dazu packe ich erst mal alles in eine Seite un tue dann ggf. größere brocken auslagern. Konsolidierung ist das Stichwort des Tages!

The original ACAB package consists out of the following four components, where only gigargoyle is really mandatory.

• gigargoyle, Control a moodlamp matrix using a TCP socket
• ACABspool
• ACABed (Web animations editor)
• Puerto Player

The original muCCC ACAB source code can be found at http://gitorious.org/ (previous it was http://github.com/mazzoo/gigargoyle). Therefore you need GIT to obtain the source.

sudo apt-get install git-core

1) start the server
If you don't have access to the matrix gigargoyle could be started with '–pretend' argument.

./gigargoyle -f -p --pidfile=./test.pid --logfile=./test.log

2) start puertoplayer, so you can see the matrix

./puertoplayer --localhost

3) spool something new with simpleclient oder start xtris

HiFish's Webplayer: http://hifish.muirauqa.org/acabweb/acabpi.htm (macht was genau???)

git clone git://gitorious.org/acab/acabed.git
git submodule init
git submodule update

• Aktuelles http://www.djangoproject.com/ (Soll das aktuelle django verwendet werden oder warum der link?)

Shows whats currently going on via a virtual puerto.

sudo apt-get install libsdl-console-dev
git clone git://gitorious.org/acab/puertoplayer.git
make

         
Usage: puertoplayer [OPTION...] 
Connecting to a gigargoyle server and displays the matrix on screen 

  --localhost                Connects to gigargoyle on localhost on (fixed) port 8080

If Option "--localhost" is missing, it tries to connect  to the live puerto acab server 83.133.178.4

Starting puertoplayer and connecting to a localhost gigargoyle server

./puertoplayer --localhost

In this case the gigargoyle server should be startet with the webclient port 8080

./gigargoyle -p -w 8080 

If started without any arguments, the player connects to puerto installation at 83.133.178.4

The Server

apt-get install libfftw3-dev libjack-dev
git clone git://gitorious.org/acab/gigargoyle.git
make

if everything went fine, the directory contains 4 binaries:

• gigargoyle, Control a moodlamp matrix using a TCP socket
• simpleclient, simple testclient for gigargoyle
• testpacket, sending testpackages to gigargoyle
• acabspectrum, UV meter on the matrix from the computer's audio input

         
Usage: gigargoyle [OPTION...] 
Control a moodlamp matrix using a TCP socket

  -f, --foreground           Stay in foreground; don't daemonize
  -i, --port-is=PORT_IS      Listening port for instant streaming clients
  -l, --logfile=LOGFILE      Path to log file
  -p, --pretend              Only pretend to send data to ttys but instead just
                             log sent data
      --pidfile=PIDFILE      Path to pid file
  -q, --port-qm=PORT_QM      Listening port for the acabspool
      --uart-0=UART_0        Path to uart-0
      --uart-1=UART_1        Path to uart-1
      --uart-2=UART_2        Path to uart-2
      --uart-3=UART_3        Path to uart-3
  -w, --port-web=PORT_WEB    Listening port for web clients
  -x, --acab-x=WIDTH         Width of matrix in pixels
  -y, --acab-y=HEIGHT        Height of matrix in pixels
  -?, --help                 Give this help list
      --usage                Give a short usage message

Starting gigargoyle

./gigargoyle -f -p --pidfile=./test.pid --logfile=./test.log  

Default Ports (when running with port cmdln params):

#define PORT_QM  0xabac /* tcp port for the queing manager */
#define PORT_IS  0xacab /* tcp port for instant streamers  */
#define PORT_WEB   8080 /* tcp port for live watchers      */

Some hints:

1. If you use ports < 1024 gigargoyle must be run as root (not recommended!)
2. pidfile and logfile should be writeable. Default /var/log and /var/pid has to be writeable by user
3. port-web could not be given at command line, patch attached
4. if you plan to use puertoplayer WEB Port 8080 ist required
5. If you have already an service running on that port, shut it down!

The following patch is now already included in distribution 0001-gixed-web_port-argument-handling-the-cmdline-argumen.patch

git clone git://gitorious.org/acab/acabspool.git

The package containing blubbtris components blubbtris.tar.gz If you have dependency problems, install the dependencies of your distribution's xtris package via your package manager (eg (debian-based): apt-get build-dep xtris)

./xtrisclient -x blubb.muirauqa.org -p <puerto ip/gigagoyle server>

— Puerto —

Public IP: 83.133.178.4

If the server doesn't accept connections you may need to connect to it through Puerto's Wifi. Use 10.0.0.11 as -p's parameter.

./xtris blubb.muirauqa.org

change 'ROWS' and 'COLS' according to the size in xtris

echo blubbtris: {,düdü,düdü,düdü,düdü,düdü,,,,}dümm

• Stein bewegt sich von oben nach unten
• Stein bewegt sich bis zum Ende
• wenn (Kollision), dann Bewegung stoppen

In der Funktion int main(int argc, char ** argv) gibt es den Abschnitt

	SDL_PollEvent( &e );
	if (e.type == SDL_KEYDOWN)
	{
		if (e.key.keysym.sym == SDLK_ESCAPE)
			exit(0);
		if (e.key.keysym.sym == SDLK_q)
			exit(0);
	}
	if( e.type == SDL_QUIT )
		exit(0);

Den können wir um weitere Keycodes und Aktionen ergänzen. Idee vom Prinzip her:

• Der Puertoplayer öffnet eine Verbindung zu unserem Spielserver
• Tasten werden abgefangen und an den Spielserver geschickt
• Das Spielfeld kommt vom gigargoyl

Gehört dieser eintrag wo anders dazu???

Modified client interfacing with an xtris server.

Known issues: — no support for the OP_GROW and OP_FALL operations, which require a local representation of the game matrix. maudafish is working on that though.

code: gigargoyle-xtris.tar.bz2 aktuelle Version ab 2010/10/31 in /home/maudafish/acab/gigargoyle.git/

format richtig: xtris.c

Wo gehören die Dateien dazu???? tetris.xml
matrix.c (Spielteilchen ; Funktion um eine Linie zu zeichnen: drawLine)